4
DESCRIPTION OF OPERATING SYSTEM
4
-
23
te7O425a
CRUISE LAMP (IF EQUIPPED)
1. Operating condition
Turn on the cruise switch during
driving. Then, the cruise lamp
comes on.
2. Deactivation condition
When pressing the brake pedal,
turning off the cruise switch, the
cruise lamp goes off.
LINKED PEDAL LAMP CRUISE PTO LAMP
LINKED
PEDAL
&58,6(
372
The lamp comes on when the syn-
chronization switch or lever is con-
nected.
The switch is used to set the PTO
rpm. With the PTO cruise button set
in the ON position, pressing the SET
(-) button turns on this lamp.
te7O426a te7O427a
te170 (NS4710, NS6010, NS4710H, NS5310H, NS6010H)-���-04.indd 23 2021-03-15 �� 1:54:21
To Next Page
Loading...
