NS4710 / NS6010 / NS4710H / NS5310H / NS6010H
4
-
24
ERROR INDICATOR
NO. DISPLAY DESCRIPTION
1 ERR-001 No Signal at TACHO Input
2 ERR-002 No Signal at Water Temp
3 ERR-006 No Signal at GLOW LAMP Input
4 ERR-007 No Signal at PTO CRUISE LAMP
5 ERR-008 No Signal at Water IN FUEL Input
6 ERR-009 No Signal at HOUR Input
You can see the Error code below on the LCD window for Hour meter. When
You found these on the LCD, please contact with KIOTI dealer.
(1) Display
te7O428a
• Some error codes may not displayed depending on the model.
NOTE
DIAGNOSTIC TROUBLE CODE(DTC)
1 2
4 3
5 6
1 2
4 3
5 6
t22O475a
(1) Total run hours (2) dtc
(3) SPN (Suspect Parameter Number)
(4) Fmi (Failure Mode Indicator)
(5) End (6) Total run hours
If an error code occurs on the en-
gine, the information of (1) to (6) is
displayed on the hourmeter of the
LCD window at an interval of 1 sec-
ond.
WARNING
• When a DTC occurs, make note
of operating conditions and
information alert indicators.
Contact your KIOTI dealer for
service assistance.
te170 (NS4710, NS6010, NS4710H, NS5310H, NS6010H)-���-04.indd 24 2021-03-15 �� 1:54:22
To Next Page
Loading...
