DAELIM BESDI 125 User Manual

Important safety warnings and precautions for vehicle maintenance.

Common problems and their potential causes related to lubrication.

Procedures for checking engine oil level and performing an oil change.

Detailed steps for removal, disassembly, inspection, assembly, and installation of the oil pump.

Procedure for inspecting the transmission oil level and recommended oil type.

Scheduled maintenance intervals for various vehicle components.

Steps for inspecting the spark plug, its gap, and torque value.

Procedure for measuring and adjusting valve clearance.

Method for measuring cylinder compression and interpreting results.

Inspection and replacement of brake pads/shoes and adjustment of lever free play.

Common problems and causes for engine starting and running issues.

Steps for removing and disassembling the carburetor.

Inspection of carburetor parts and service of the float chamber/jet.

Safety precautions for engine removal and list of serviceable components without removal.

Step-by-step instructions for removing the engine from the vehicle.

Steps for installing the engine back into the vehicle, including torque values.

Common problems related to engine starting and vehicle movement.

Diagnosing and resolving problems related to engine performance and noise.

Diagnosing problems like low compression, smoke, noise, and overheating.

Diagnosing engine noise, starting issues, and oil leaks.

Diagnosing problems like hard steering, wobbling, and suspension noise.

Safety precautions and specifications for rear wheel, brake, and suspension.

Diagnosing problems like wobble, vibration, soft/hard suspension, and noise.

Safety precautions for brake system maintenance and common issues.

Procedure for changing brake fluid and bleeding the brake system.

Safety precautions, general warnings, and technical specifications for the battery and charging system.

Performing leak tests and charging voltage inspections.

Safety precautions and specifications for the ignition system.

Diagnosing no spark, low voltage, and rough idling problems.

Safety warnings and specifications for servicing the starter motor.

Diagnosing problems with the starter motor not turning or turning slowly.

Flowchart for diagnosing and resolving engine starting issues.

Flowchart for diagnosing stalls, hard starting, and rough idling.

Flowchart for diagnosing poor acceleration and idling issues.

Diagnosing poor performance, noise, and handling issues related to clutch, wheels.