Need help?Do you have a question about the DAELIM Q2 and is the answer not in the manual?
General| Engine Type | 4-Stroke, Single Cylinder |
|---|---|
| Brakes (Front) | Disc |
| Tires (Front) | 120/70 |
| Tires (Rear) | 130/70 |
| Transmission | Automatic |
Brief welcome message to the owner upon purchasing the Daelim vehicle.
Information on vehicle capacity and roles for operator and passenger.
Specifies that the motorcycle is designed for on-road use only.
Emphasizes reading the manual for safety and understanding warnings.
Guidelines for safe operation, including attire and careful driving.
Guidance on proper body posture and driving techniques for safety.
Warnings against unauthorized vehicle structure modifications.
Advice on adding accessories and potential battery issues.
Passenger safety regarding the hot muffler during travel.
Explanation of various gauges and indicators on the dashboard.
Details on operating the main switch and smart key functions.
Instructions for starting the engine using the starter button.
Explanation of the engine stop switch's function and warnings.
How to adjust the headlight beam angle.
Procedures for starting the vehicle with the smart key.
Steps to properly stop the engine and vehicle.
Guide on how to replace the battery in the smart key.
How to adjust the rear suspension stiffness.
Instructions for locking and opening the seat.
Information about the under-seat storage compartment.
Operation of the inner box lid and its locking mechanism.
How to use the 12V charging socket.
Detailed steps for starting the engine safely.
Checking for any anomalies found during previous day's driving.
How to check brake lever free play and fluid levels.
Guide to checking and adjusting tire air pressure.
Inspecting tire tread and sidewalls for cracks or damage.
Checking for uneven wear patterns on the tire tread.
Procedure for checking the engine oil level.
Check operation and condition of headlights and tail lights.
General procedure for replacing vehicle bulbs safely.
Step-by-step guide to refilling brake fluid.
How to inspect brake pad wear and condition.
Checking and refilling transmission oil.
Specification for the recommended transmission oil.
Inspecting for transmission oil leaks.
Guide to inspecting, cleaning, and adjusting the spark plug.
Instructions for cleaning battery terminals.
Checking rubber boots for damage and proper installation.
Precautions and methods for washing the vehicle.
Explanation of scheduled maintenance checks.
Rider's daily vehicle inspection before riding.
Importance and schedule for replacing engine oil.
Specific tips for inspecting brakes and tires.
Inspect spark plug status and ignition timing for proper engine function.
Verify engine starting, noise, and low-speed operation.
Log sheet for tracking part replacements and maintenance.
Essential steps before starting a ride.
Explains the forces involved in turning a motorcycle.
How speed affects centrifugal force during turns.
Describes the 'lean-with' turning posture.
Describes the 'lean-in' turning posture and its benefits.
Explains blind spots around large vehicles.
Illustrates vehicle turn radius differences.
Explains how friction enables braking.
How inertia affects stopping distance.
Compares braking distances with different brake applications.
To Next Page
