EasyManuals Logo

DAELIM Q2 User Manual

DAELIM Q2
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
21
WARNING
If the back mirrors are not installed to
the vehicle, when changing road lane,
the rider may not see well backward
then this causes the collision with
other vehicle to happen death or
serious body damage.
Before starting, be sure to push aside
the side stand. If riding at the side
stand stood up, in the curve, the
vehicle may tough the ground. This
causes the vehicle’s turn over and
serious damage to the rider.
Before entering traffic, use the correct turn signal to
forward other drivers of your intentions.
Speed is controlled by the operation of the
throttle grip..
If the throttle grip is rotated….
The speed of the vehicle increases. Please rotate the
throttle grip slowly. When climbing a hill, the throttle
grip need to be rotated further to give the vehicle more
power(Refer to P.43 “ Riding a hill “)
If the throttle grip is allowed to rotate back….
Speed decreases. This can be done slowly or quickly,
depending on how quickly you need to decelerate.
Work the front and rear brakes together.
Allow the throttle grip to rotate back to its beginning
position and then squeeze the brake levers.
If it is best to operate the brakes by first lightly
squeezing the brake levers and then changing to a
more firm squeeze.
To stop most safely in a short riding, please grasp the
front and rear brakes together.
Normally, for the best braking, the ratios between
front and rear brakes are FR:7, RR:3 at the dry road.
On rained road or slippery road, FR : 6, RR. : 4.
By doing these driving methods, these good driving
habits become the brake distance being shorten and
the life brakes being extended.
PROPER DRIVING METHODS
RR. BRAKE FR. BRAKE
ROTATE
BACK ROTATE
CAUTION
At high speeding, the lower side of the
vehicle may touch with the ground in
speed bump, then it may cause the
vehicle’s turn over. Then, when
passing the speed bump, please
decrease the speed and pass.
This vehicle is designed to ride on-
road. If riding in steep path of
mountains, because of serious
trembling of the vehicle, the cables
and wire break away from the clamp
and cause the accident.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DAELIM Q2 and is the answer not in the manual?

DAELIM Q2 Specifications

General IconGeneral
BrandDAELIM
ModelQ2
CategoryScooter
LanguageEnglish

Related product manuals