79
< LEAN-OUT >
This is a turning position with motorcycle leaned inside
more than driver, which is opposite to the lean-in position.
With this position, quick turn is well performed and driver can
obtain wide front visual field adequate to drive on the rained or
slippy road because it has best road holding. However, special
attention is required because there is danger of slipping on the
bad holding road.
① Turn the throttle grip to its original position and decelerate
using both front and rear brakes.
② Lean the vehicle toward inside of turn circle while driving
slowly at constant speed.
③ Accelerate gradually.
TURNING METHOD
To Next Page
Loading...
Need help?
General
