18
●
Make sure to check the oil, gasoline, etc., before
starting the engine.
●
Please ensure that the main stand and side stand are
lift up at starting the engine.
●
At starting the engine, grip the brake as always.
●
Drive with care for both safety reasons and longer
vehicle life.
●
For 1 month(or 500 km) after purchasing the
vehicle, drive moderately avoiding fast starts and fast
acceleration.
Lock the rear wheel
After certificating the Smart key, turn the main
switch to the (ON) position. (Blue lamp lights)
●
The start is possible when the Smart key is in 1
meter from the vehicle.
Press the start button. At operating start, the green
lamp of the main switch lever lights.
<USING THE ELECTRIC START(CELL)>
●
Press the start button without rotating the throttle grip.
※
At searching the Smart key, the time of certification
make take long, keep pressing the start button by
the time when the vehicle starts by motor rotating.
ENGINE STARTINGCORRECT DRIVING OPERATION
Smart key
●
Make sure that the rear wheel is
locked when starting the engine to
prevent an unexpected sudden start of
the vehicle.
●
At standing the main stand, if
accelerating by operating the throttle,
the rear wheel may touch the body,
then it occurs a serious damage.
●
Immediately release the starter button
as soon as the vehicle has been started.
●
Do not push the starter button when
the engine is running. This can damage
the starting motor.
●
If you take the Smart key together cell
phone, navigation, note-book
computer, metallic material, the
communication error between the
Smart key and the vehicle may occur
then the vehicle may not start.
To Next Page
Loading...
Need help?
General
