17
Depending upon the rider’s convenience, you can
adjust the position of SEAT BACK REST.
●
Open the seat and untie the screw lever in back side
of seat, adjust the position of back rest and lock the
screw lever.
When open or close the inner box lid, use the normal
key.
<How to lock>
Turn the normal key to the right and close the cover,
next turn it to the left and pull it out.
<How to open>
By turning the normal key to the left, open it.
At starting the engine, open the inner box lid and put
the proper charge socket below 12V, 1A in and use.
CHARGE SOCKET
INNER BOX LID
CHARGE
SOCKET
INNER BOX LIDSEAT BACK REST
BACK REST
SCREW LEVER
●
Do not place valuable or fragile thing(s).
●
At washing the vehicle, the water may
inflows. So, if you place the important thing,
●
Use at engine starting.
●
When not using, close the inner box lid
cover.
To Next Page
Loading...
Need help?
General
