To Next PageTo Next Page
Need help?Do you have a question about the DAELIM NS125III and is the answer not in the manual?
Key technical data and dimensions of the vehicle components.
Specific torque settings for engine and frame components.
Visual representation of the vehicle's electrical system layout.
Adjusting the valve clearance for optimal engine performance.
Method for measuring cylinder compression pressure.
Detailed steps for removing the engine from the vehicle.
How to inspect and replace the drive belt.
Procedure for removing, inspecting, and assembling the movable drive face.
Steps to disassemble the clutch assembly.
How to disassemble the driven face assembly.
How to remove, inspect, and assemble the starter clutch.
Procedure to remove the cylinder head from the engine.
Inspecting and adjusting valve seats.
Steps to reassemble the cylinder head with valves.
How to install the cylinder head onto the engine.
Procedure for assembling the camshaft and related parts.
Procedure for assembling the piston into the cylinder.
Steps for removing and inspecting the transmission components.
Procedure for assembling the crank case.
How to remove the crankshaft from the crank case.
Inspection and replacement of crankshaft bearings.
Procedure for removing and installing the front wheel.
Detailed steps for front fork disassembly, inspection, and assembly.
How to remove and install the steering stem and bearings.
Procedure for removing and installing the rear wheel.
Steps for inspecting and disassembling the rear brake.
How to remove, disassemble, inspect, and assemble the rear suspension cushion.
Procedure for changing and bleeding brake fluid.
How to inspect and replace brake pads.
Procedure for caliper disassembly, inspection, and installation.
Steps for removing, disassembling, inspecting, and assembling the master cylinder.
How to inspect charging system voltage and leakage.
Checking ignition timing using a timing light.
Diagnosis of starter motor issues.
Steps for removing, disassembling, inspecting, and assembling the starter motor.
Inspection and testing of the starter magnetic switch.
Step-by-step guide for diagnosing starting issues.
Troubleshooting steps for low engine power.
Diagnosing issues affecting low-speed operation.
Troubleshooting problems at high speeds.
Diagnosing general operational problems like clutch/pulley issues.
Troubleshooting starter motor failure to turn or crank.
General
