3-9
Suspension
NOTE
Front wheel
● Hold the brake lever, and compress the front
cushion up and down several times to check the
operating conditions.
● Check the front fork for oil leakage, parts damage
or looseness.
Rear wheel
● Compress the near cushion up and down several
times to check the operating conditions.
● Check the rear fork for oil leakage, parts damage
or looseness.
Bolts and Nuts Tightening
●Check all nuts and bolts of the frame during the
regular maintenance ( 3-3) to check if they meet
the prescribed torque value.
● Check all pins, clips, hose clamps and cable stays.
Inspections/Adjustments
Do not ride motor cycle with an unsatisfactory
suspension. Loose or worn suspension parts will
lead to deterioration in the vehicle’s safety and
operation efficiency.
F
F
● Check the side stand ignition cut-off switch ;
-Put the side stand up.
-Start the engine.
-Lower the side stand. The engine should stop as
you put the side stand down.
● If there is a problem with the system, check the
side stand swich.
Side stand
switch