DAELIM S4 - Page 30

<TAIL/STOP LIGHT BULB>
(1) Loosen 2 tapping screws to disassemble
tail light lens.
(2) Press a bulb with a light force and rotate
it to counterclockwise to disassemble it.
(3) Replace it with new bulb. Apply reverse
order of disassembly for assembly.
TAIL/STOP LIGHT BULB : 12V 21/5W
<WINKER BULB>
Front Winker Bulb
(1) Press a bulb with a light force and rotate
it to counterclockwise to disassemble it.
(2) Replace it with new bulb. Apply reverse
order of disassembly for assembly.
FRONT WINKER BULB: 12V 10W
Rear Winker Bulb
(1) Loosen two tapping screws to
disassemble a tail light lens and a winker
lens.
(2) Press a bulb with a light force and rotate
it to counterclockwise to disassemble it.
(3) Replace it with new bulb. Apply reverse
order of disassembly for assembly.
REAR WINKER BULB: 12V 10W
28
CAUTION
●
When disassembling, care is to be taken
for ensuring that a tail light lens can not
be damaged.
●
When replacing a tail light lens, be sure
to assemble lens seal securely.
STOP LIGHT BULB
TAIL/STOP LIGHT LENS
RR. WINKER BULB
RR. WINKER LENS
WINKER BULB
FR. WINKER LENS