EasyManua.ls Logo

DAEWOO ELECTRONICS AVS1302 HDMI - USB Record Function; Using the Bluetooth Mode

DAEWOO ELECTRONICS AVS1302 HDMI
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Bluetooth Karaoke Machine
AVS1302 HDMI & AVS1302W HDMI
User Manual
IMPORTANT RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
9. Press the STOP button (17) to stop and exit playback mode.
To switch the unit off, press and hold the POWER/MODE button (4) the LED
Power Indicator (3) will go out to show the unit is now powered down.
USB Record Function
The USB Record function allows a USB Memory Stick (not supplied) to record your
Karaoke performances.
1. Insert a USB memory stick into the USB Port (23) on the front of the unit
ensuring that it is either blank or has enough memory space.
2. Whilst another source is playing i.e. a Karaoke CD, press the REC button (13), the
REC Indicator (12) will illuminate to show that the USB Memory Stick is now
recording the CD and the Microphone(s) (36).
3. Press the STOP button (17) to stop and exit recording mode.
4. To playback recordings, repeatedly press the POWER/MODE button (4) to select
the USB mode.
5. Select the desired track Press SKIP (15) & SKIP (16) to choose the song that
you want to play.
6. Press the PAIR/PLAY/PAUSE button (19) to start playing back your
recording.
7. Adjust the volume to the desire level using the MASTER VOL control (21).
The recording function is available in Bluetooth, AUX, and CD mode. Whilst
playing CDs, it can only record the songs with CD, CD-R, CD-RW, and CD+G format
but not the MP3 format.
Using the Bluetooth Mode
1. Repeatedly press the POWER/MODE button (4) to select the Bluetooth mode;
“BLUETOOTH” will be shown on the Monitor (1).
2. Enable the Bluetooth mode on your Phone, Tablet or other Bluetooth enabled
device and set it to search.
3. Select ‘AVS1302’ from the search results found by your device. Once the device
has paired with the Karaoke Machine a chime will be heard and the Bluetooth
Indicator (18) will light up continuously.
4. Press the PAIR/PLAY/PAUSE button (19) to start and stop the connected
device playing.
5. Adjust the volume to the desire level using the MASTER VOL control (21).
6. Alternatively use your devices controls in the usual manner.
Use the PAIR/PLAY/PAUSE button (19) to pair or unpair a Bluetooth
connected device.