18
Put 250ml of chlorine bleach mixed with 500ml of detergnet into the detergent case.
Then close the door.
Press the Power button.
• The LED shows only '---' and all Program Lights turn on.
Select the ‘Tub Clean’ program using program selection dial.
• Washing temperature 'Cold' , spin '400' rpm and rinse '2' times are selected
automatically.
• If you want to change options(Rinse+, Water+, Time Delay), press each button.
Press Start/Pause button.
• The washer will be operating with locking door and supplying water.
* TUB CLEAN PROGRAM
Note
• You will not be able to select any other programs during 'tub clean' except for rinse time(s).
• ‘Rinse+’ and 'Water+' and 'Time Delay ' options are selectable with Tub Clean program.
• Only 'Cold' washing temperature is selectable with Tub Clean program.
• Only '400'rpm of spin velocity is selectable with Tub Clean program.
• Use this program without load.
• This cycle should be used once a month.
1
2
3
4
To Next Page
Loading...
