2. Press and hold the Play/Pause/Phone button (4) on both speakers for three seconds
and the two speakers will automatically pair together.
3. Connect to the speakers via Bluetooth as described in ‘Using Bluetooth Mode’ above.
4. Enable the music player on your Phone, Tablet or other device you are using.
5. Briefly press the Play/Pause/Phone button (4) on either speaker to start and stop
(pause) the connected device playing.
6. Use the Skip Back ▬ (2) and Skip Forward + buttons (3) on either speaker to change the
track being played.
7. Press and hold the Skip Back ▬ (2) and Skip Forward + buttons (3) on either speaker to
decrease and increase the volume level.
8. Alternatively use your devices controls in the usual manner.
NB True Wireless Stereo pairing is only available in Bluetooth mode.
Care and Use of your Speakers
• Always disconnect the Speakers from the USB charging supply before cleaning.
• Clean outside of the Speakers with a clean damp cloth. Never clean with harsh or abrasive
cleaners.
• Do not submerge the Speakers in water or any other liquids.
Technical Specification
Waste batteries should not be disposed of with household waste. Please recycle
where facilities exist. Check with your Local Authority or retailer for recycling advice.