Daewoo B25S-2 Disassembly/Assembly

Vehicle Systems Disassembly & Assembly
19.
If the bearings were removed from the tilt
cylinder pin bores, install new ones.
20. Fasten a hoist and nylon strap to secondary
cylinder (12). Install secondary cylinders (12) into
the stationary mast.
21. Install secondary cylinder mounting brackets (13)
over the secondary cylinders.
22. Install top retainer bolts (14) for the secondary
cylinders.
23. Install hydraulic steel tube to each secondary
cylinder. When install the steel tube, assembling
angle should be kept as shown in above figure.
24. Connect chains (16) at the bottom of the mast.
24
IDCD043P IDCD025P
IDCD322S
IDCD024P
IDCD027P
IDCD026P
12
14
13
16
13°
15°

Daewoo B25S-2 Specifications

General

Brand	Daewoo
Model	B25S-2
Category	Multi Terrain Loaders
Language	English