Daewoo BC30S-2 User Manual

Specifications
Systems Operation
Testing & Adjusting
Disassembly & Assembly
Lift Trucks Power Train
B20S-2, B25S-2, B30S-2
BC20S-2, BC25S-2, BC30S-2
SB2025E01
Aug. 1999

Daewoo BC30S-2 Specifications

General

Brand	Daewoo
Model	BC30S-2
Category	Multi Terrain Loaders
Language	English

Summary

Important Safety Information

Drive Motor

Motor Brushes

Procedures for inspecting and replacing drive motor brushes.

Brush Seating

New Brush Installation

Armature Tests

Tests to diagnose armature issues, including short circuits.

Power Transfer Group

Final Drive

Troubleshooting

Power Transfer Group and Final Drive

Field Coil and Terminal Tests

Open Circuit Test

Testing field coils for open circuits.

Ground Test

Testing field coils for ground faults.

Armature Terminal Test

Brush Holder Test

Procedure for testing drive motor brush holders.

Power Transfer Group Adjustments

Power Transfer Group

Pinion Installation

Pinion Depth Check

Pinion Bearing Adjustment

Power Transfer Group Bearing and Gear Clearance (Backlash) Adjustments

Final Drive

Wheel Bearing Adjustment

Steps for adjusting the wheel bearings on the final drive.

General tightening torque for bolts, nuts and taperlock studs

Metric fasteners

Drive Motor Specifications

Brush and Commutator Specifications

Details brush size, commutator diameter, and related measurements.

Thermal Switch Specifications

Provides opening and closing temperatures for thermal switches.

Power Transfer Group

Power Transfer Group Adjustments

Remove And Install Power Transfer Group

Disassemble Power Transfer Group

Disassembly & Assembly

Brakes, Brake Adjuster And Wheel Cylinder

Detailed steps for removing and installing brake system components.

Remove Brakes, Brake Adjuster And Wheel Cylinder

Install Brakes, Brake Adjuster And Wheel Cylinder

Final Drives And Hubs

Remove Final Drives And Hubs

Oil Cooled Disc Type Brake

Remove & Install Brakes