Need help?Do you have a question about the Daewoo D20S-2 and is the answer not in the manual?
General| Model | D20S-2 |
|---|---|
| Category | Forklifts |
| Power Source | Internal Combustion |
| Rated Capacity | 2000 kg |
| Load Center | 500 mm |
| Lift Height | 3000 mm |
| Travel Speed (loaded/unloaded) | 18/19 km/h |
| Fuel Type | Diesel |
| Weight | 3200 kg |
| Tire Type | Pneumatic |
Provides pressure specifications for the hydraulic control valve for different models.
Details the hydraulic system schematic and component identification for specific models.
Explains the hydraulic system schematic and component identification for the D20/25-2 model.
Explains the function of the anti-stall and remote relief valve system.
Details the construction and operation of the hydraulic control valve.
Explains the operation of lift, tilt, and auxiliary spools in the hydraulic system.
Details the operation of flow control and relief valves.
Explains the operation of relief and check valves.
Lists common hydraulic system problems, their probable causes, and remedies.
Procedures for checking and adjusting relief valve pressure.
Procedure for adjusting tilt and attachment flow control valves.
General guidelines for disassembly, cleaning, and assembly of hydraulic units.
Instructions for careful disassembly of hydraulic unit parts and components.
Detailed procedures for assembling various hydraulic valve components.
Procedures for installing operating spools and end cap components.
To Next Page