10
for other purposes is not permitted.
Before starting any work, all protective and safety de-vices
must be in place.
• The machine has been designed to be operated by one
person.
• The operator is responsible for third parties in the area of
operations.
• All safety and hazard notices on the machine must be
observed.
• All safety and hazard notices on the machine must be kept
in a completely legible condition.
• Use the machine in a technically awless condition only, as
well as for its intended purpose, in a safe manner and
being aware of dangers, in compliance with the operating
instructions!
• Disruptions which can affect safety in particular must be
eliminated straight away!
• The manufacturer’s safety, operation and maintenance
instructions as well as the technical data given in the
calibrations and dimensions must be adhered to.
• Relevant accident prevention regulations and other generally
recognized safety and technical rules must also be
adhered to.
• The machine may only be used, maintained or re-paired by
trained persons who are familiar with the machine and have
been informed about the dan-gers. Unauthorized
modications of the machine exclude a liability of the
manufacturer for damages resulting from the modications.
• The machine is intended for use only with original spare
parts and original tools from the producer.
• Any other use is considered to be not intended. The
manufacturer excludes any liability for resulting damages,
the risk is exclusively borne by the user.
• The device must not be used for commercial, technical or
industrial applications.
EN
To Next Page
Loading...
