44
• In case of longer idle periods of the mower, empty the
petrol tank with a petrol suction pump.
• Oil and service the device
8. MAINTENANCE AND CLEANING
Maintenance and repairs
Before beginning cleaning, adjustment, repair and
maintenance operations, park the machine on rm, level
ground, engage the parking brake, stop the en-gine, allow it
to cool down and remove the ignition key.
Allow the machine to cool down before working on or around
the engine, exhaust manifold or muffler; this also applies in
particular to all maintenance opera-tions on the mowing
deck. Temperatures of 80 °C and above can be reached.
Danger of burns!
Direct contact with engine oil can be dangerous. En-gine oil
must not be spilled.
Cleaning:
Following operation, the entire ride-on mower and the
attachments must be cleaned. In particular, all grass
residues must be removed because the moisture
these contain leads to damage in the long term.
Clean the device with water as follows.
• Place the hose connection piece onto the water
connection (6) of the mower and open the tap.
• Start the mower and switch off again after about 30 seconds.
The rotating blade bar throws the water onto the bottom of
the mower and thus cleans it.
• Turn off he tap and remove the hose connection .
• Clean the top with a cloth (do not use any sharp objects).
EN
To Next Page
Loading...
