45
Note: Dirt and grass is easiest to remove immedi-ately
after you have nished mowing the grass. Dried on grass and
dirt can result in poorer mowing per-formance. Check that
the grass chute is free of any residual grass. Remove any
such residue.
Never clean the lawn mower with a water jet or high-pressure
cleaner. The engine must remain dry.
Do not use aggressive cleaning agents such as cold cleaner
or petroleum ether.
Never drive close to an edge or a ditch for the purpose of
cleaning (e.g. the frame of) the ride-on mower.
In order to prevent re hazards, keep the engine, cooling
ribs, battery compartment, area around the fuel tank and
exhaust free from grass, leaves or es-caping oil (or grease).
Always clean the grass catcher box.
Maintenance operations:
Only maintenance operations described in this in-struction
manual may be carried out. Have all other work performed
by a specialist dealer. If you do not have the necessary
expertise or auxiliary equipment, please always contact a
specialist dealer.
We recommend: Have maintenance work and repairs
completed by specialist dealers only.
The ride-on mower and all attachments should be in-spected
once annually by a specialist dealer.
Always keep warning and information stickers clean and
readable. Damaged or missing stickers must be replaced by
new, original plates. If a component is replaced with a new
component, ensure that the new component is provided with
the same stickers.
To Next Page
Loading...
