35
Start the engine with the start cable
• Check the motor oil level. See “oil level check” section.
• Engage the catch bucket (9).
• Depress the brake pedal (3) completely and activate the
locking brake (16).
• The mower (8) must now be shut off.
• Set the desired cutting height (7)
• Set the gear lever (13) to neutral “N”
• Turn the ignition key (12) to “ON”
• Fold the seat up and pull the start cable
• Attention: In case of cool weather, it may be necessary to
repeat the starting process numerous times.
• Do not permit the start cable to slam back into place.
• Fold the seat closed.
To Next Page
Loading...
