How to fix TFT-LCD color deviation/aberration on Daewoo DDC500?
To fix color deviation or aberration on your Daewoo Digital Camera's TFT-LCD, check if the CCD flex board installation and the flex board itself are OK. Also, check if the CCD has a short-circuit, cold soldering, or insufficient soldering. Finally, see if U5 has cold soldering, insufficient soldering, or is NG (No Good).
Why Daewoo Digital Camera power on fail (with current)?
If your Daewoo Digital Camera fails to power on (but has current), try updating the boot again to see if it powers on. Also, check if U802 has cold or insufficient soldering, and verify that each voltage on the power board is normal.
Why Daewoo Digital Camera makes noise?
If your Daewoo Digital Camera is making noise, check if the lens is normal. Try changing to another lens. Also, check if the power wire of the camera is OK.
Why does my Daewoo DDC500 fail to focus?
If your Daewoo Digital Camera is failing to focus, check if the lens action is normal.
What to do if Daewoo DDC500 fail to charge battery?
If your Daewoo Digital Camera fails to charge its battery, check if U801 and Q801 are OK. Also, check if Q802 soldering is OK and its components are in good condition.
What causes lens flex issue in Daewoo DDC500?
To solve lens flex issues with your Daewoo Digital Camera, check if the contact between the lens connecting board and interface is OK and if the flex board is broken. Also, check if J4 on the MCU board has cold soldering, and ensure the output of J4 on the MCU board is +5V. Finally, check if U7 on the MCU board and its surrounding components are OK.
General| Type | Compact |
|---|---|
| Image Sensor | CCD |
| Effective Pixels | 5.0 Megapixels |
| Storage Media | SD Card |
| Battery Type | AA |
To Next Page
