1. Setting the Off Timer
• Move to Off Timer in the Time menu.
• Press the
” ”
buttons.
• Select the Off Timer to "On" by pressing the
” ”
buttons.
2. Off Time Set
• Move to Off Time Set in Off Timer of the Time menu.
• To go to the Off Time Set, press the
”
”
buttons.
• Place the cursor to AM / PM / Hour / Min. with the
” ”
buttons.
• Set the AM / PM / Hour / Min. with the ”
”
buttons and then presses the “OK” button to
complete.
1. Setting the Sleep mode.
• By pressing the
” ”
button on the remote controller
repeatedly, you can select one of the following
settings: Sleep Timer: Off
5 10 15 30
45 60 90 120 Off
• The set will turn off after the time you select.
Note:
If an active signal is not present for about 30 minutes,
the set will automatically turn to Stand-by mode.