To Next PageTo Next Page
Need help?Do you have a question about the Daewoo DSB-092LHG and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 9000 BTU/h |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 8 kg |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Dimensions (Outdoor Unit) | 700x245x544 mm |
Steps to prepare the air conditioner for prolonged periods of non-use.
Procedures for preparing the air conditioner for operation after storage.
Detailed instructions for cleaning air filters and deodorization filters.
Technical specifications and operating parameters for the DSB-092LHG model.
Technical specifications and operating parameters for the DSB-242LHG model.
Defines key terms and abbreviations used in the control specifications.
Details on Cool, Auto Changeover, and Fan modes controlled by the main board.
Explains the operational logic and conditions for Dry and Heat modes.
Covers high pressure protection and its operational parameters.
Details how to use the timer and sleep mode for automated operation.
Explains automatic fan speed adjustments and manual swing functions.
Describes the functions of the manual operation button and system LED lights.
Instructions for starting, stopping, and adjusting temperature via remote.
Guides on selecting and operating AUTO, COOL, DRY, FAN, and HEAT modes.
Instructions for setting and canceling the timer function for operation.
Diagrams and lists of indoor and outdoor unit installation accessories.
Steps for securing the mounting plate and drilling wall holes.
Guide to connecting electrical wires for indoor and outdoor units.
Procedures for installing refrigerant pipes and discharging air from the system.
Steps for safely removing the front grille of the indoor unit.
Procedures for accessing and removing electrical parts of the indoor unit.
Steps to remove the drain tray, evaporator, and fan motor.
Procedures for disassembling the cabinet, fan motor, and control unit.
Diagnosing problems with unit operation and remote controller functionality.
Addressing issues with cooling/heating efficiency and initial heat mode airflow.
Troubleshooting cracking sounds, water noises, unusual unit sounds, and odors.
Understanding fan stops during heating and outdoor unit water leakage.
Diagrams and part numbers for the indoor unit components.
Diagrams and part numbers for the outdoor unit components.
Diagram and list of components for the remote controller.
Schematic showing electrical connections for the indoor unit.
Schematic showing electrical connections for the outdoor unit.
