To Next PageTo Next Page
Need help?Do you have a question about the Daewoo DTQ-14Q1FS and is the answer not in the manual?
Specifies the AC voltage and frequency range for power supply.
Details the power consumption for different model sizes.
Lists the carrier frequencies for video, sound, and color signals.
Indicates the power output for the audio system.
Specifies speaker impedance and power handling.
States the impedance requirement for antenna connection.
Outlines the frequency bands covered by the TV tuner.
Safety precautions regarding component placement, protective devices, soldering, and AC leakage testing.
Guidelines for preventing X-ray emission from CRT and high-voltage circuits.
Precautions for handling picture tubes to prevent implosion and use of proper replacement parts.
Recommendations for safe and optimal TV placement to ensure ventilation and prevent hazards.
Introduces the TV's components and remote control functions.
Describes the buttons and jacks located on the television's front panel.
Details on high voltage limits and X-ray protection circuit checks.
Essential safety measures for servicing, including isolation transformers and picture tube handling.
Emphasizes safety-related characteristics of components and proper replacement procedures.
General advice on component replacement, lead dress, and wiring practices.
Basic picture adjustments for optimal performance and color shading correction.
Procedure to adjust the screen voltage for proper picture cutoff.
Steps to achieve the clearest picture by adjusting the focus control.
Method to align the horizontal width of the picture.
Procedure to center the picture vertically using V.DC adjustment.
Steps to adjust the picture height using V.Size control.
Test procedure for the X-ray protection circuit after deflection system service.
Adjusting R/G/B bias and drive for accurate white balance.
Procedure to set the gradation pattern for optimal brightness.
Mechanical adjustments for the convergence magnet assembly and yoke.
Steps to ensure accurate color reproduction by adjusting purity magnets and yoke.
Procedures for adjusting center and circumference convergence using magnets and yoke.
Block diagram illustrating the internal structure of the power IC.
Details the function of each pin on the STR-S5707 IC.
Explains built-in protection circuits like OVP and TSD.
Detailed description of the power supply's start-up, oscillator, and protection circuit operations.
Circuit diagram showing the components of the overcurrent protection system.
Describes how the OCP circuit protects the set from overload.
Troubleshooting steps for a TV with no power or secondary output.
Diagnostic guide for when the TV does not power on correctly.
Steps to diagnose and resolve issues related to a blank or missing picture.
Troubleshooting procedures for audio problems in mono and stereo models.
Diagnostic steps for problems with channel selection or stopping.
Troubleshooting guide for cases where the TV displays no color.
Steps to diagnose and fix issues with vertical picture display.
Troubleshooting for when the On-Screen Display (OSD) is not functioning.
Diagnostic steps for a non-functional remote control.
Lists optional components for main PCB across different models.
Details optional audio components for main PCB across different models.
General