Do you have a question about the Daewoo DTQ-14N3FC and is the answer not in the manual?
Safety checks to be performed after correcting the original service problem.
Precautions regarding fire and electrical shock hazards during servicing.
Guidelines and precautions related to X-radiation emission from the picture tube.
Safety precautions concerning the picture tube's implosion protection system.
Recommendations for safe and proper installation of the television receiver.
General introduction to the TV's controls, buttons, and terminals.
Description of the controls and indicators on the front panel of the TV.
Details about the antenna terminal and connections on the back panel.
Specific precautions and checks for X-ray radiation protection.
General safety warnings and precautions for service personnel.
Information on special safety-related characteristics of parts.
General notes and procedures for servicing the equipment.
Basic adjustments for optimal receiver performance upon installation.
Procedure for adjusting the vertical height of the picture.
Steps to adjust the focus for a sharp picture.
How to adjust the RF Automatic Gain Control for optimal reception.
Procedure for checking the high voltage output of the receiver.
Testing the X-radiation protection circuit after service.
Adjusting the gray scale for accurate color reproduction.
Procedure for adjusting the main B+ voltage.
Adjusting the sub-brightness for proper picture blooming.
Mechanical positioning of convergence magnets and yoke.
Adjusting color purity for accurate color display.
Adjusting convergence magnets for proper picture centering.
Adjusting the deflection yoke for circumference convergence.
Alignment procedures for the Picture IF and AFT circuits.
Troubleshooting flowchart for no power condition.
Troubleshooting steps for a television with no picture display.
Troubleshooting flowchart for issues with no sound output.
Troubleshooting steps for channel selection not stopping.
Troubleshooting guide for the absence of color in the picture.
Steps to troubleshoot missing vertical deflection in the picture.
Troubleshooting for the On-Screen Display functionality.
Steps to diagnose and fix remote control issues.