Daewoo FRS-2021 - Page 14

CONTENTS REMARK
2. "FRZ SET." button
1) Temperature control of Freezer compartment
2) 5 steps of sequential temperature mode
Initial mode by power input : “MID” (Temperature and bars are shown.)
* Letters are not indicated at Soft-Mid and Mid-Strong modes.
(Just temperatures and bars are shown.)
Temperature progress : Low -> (Low-Mid) -> Mid -> (Mid-High) -> HIgh
Temp. indication : -15C -17C -19C -21C -25C
Number of bars : 5EA 3EA 5EA 3EA 5EA
3. "SUPER FRZ." button
When this mode is chosen, “QUICK” icon and letters of freezer flicker 3 times and
ON. (The set temperature and bars are still the previous value.)
4. "REF SET.” button
1) Temperature control of Refrigerator compartment
2) 5 steps of sequential temperature mode
Initial mode by power input : “MID” (Temperature and bars are shown.)
* Letters are not indicated at Soft-Mid and Mid-Strong modes.
(Just temperatures and bars are shown.)
Temperature progress : Low -> (Low-Mid) -> Mid -> (Mid-High) -> HIgh
Temp. indication : 4C 3C 2C 1C 0C
Number of bars : 5EA 3EA 5EA 3EA 5EA
5. "SUPER REF." button
When this mode is chosen, “QUICK” icon and letters of refrigerator flicker 3 times
and ON. (The set temperature and bars are still the previous value.)
6. "SLEEP" button
1) Start by pushing the button ("ON" lights.)
2) Stop by pushing button again ("OFF" lights.)
3) Automaticcally terminated after maximum 12 hours ("OFF" lights.)
7. "LOCK" button
1) Start by pushing the button ("LOCK" letters and icon light.)
* No other buttons and modes, buzzer sound are controllable.
2) Stop by pushing button again for a second ("OFF” and icon light.)
- 13 -