BEFORE DRIVING YOUR CAR 1–31
4. Before closing the engine hood, press
the support rod firmly into its clip to pre-
vent it from rattling.
5. To close, lower the engine hood and al-
low it to drop from the height of about
30 cm.
Make sure that the engine hood is locked
in position by pulling at its front edge.
3. To hold the engine hood in the open po-
sition, insert the support rod into the slot
provided in the underside of the engine
hood.
2. Push the bottom of the hook to the left
and lift the engine hood.
To Next Page
Loading...
