Daewoo RACER 1998 User Manual

p01.tif
ELECTRICAL WIRING DIAGRAM
' '
NEXIA
CIELO
RACER II
r. ·
1
«e
1
1 ·~, ·
;- . ,._ - - , ,,
~ • • ' • . .• . • • "t • •• ... • ... • •••• -·- ...
. .
I t r ' : t • ' ~ • i • ,1. ; .i, • •
. . .
• DAEWOO MOTOR CO., LTD.

Daewoo RACER 1998 Specifications

General

Brand	Daewoo
Model	RACER 1998
Category	Automobile
Language	English

Summary

A. GENERAL DESCRIPTION

1. HOW TO READ WIRING DIAGRAM

Explains symbols, line types, connector and terminal numbering, cable colors, and ground locations.

2. CIRCUIT IDENTIFICATION CODE

Lists component codes (E, F, G, H, K, L, M, D, R, S, X, Y) and their corresponding part names.

3. WIRING COLOR

Details cable color coding symbols and wire sectional area indication.

4. ECM CLASSIFICATION

Provides a table of ECM part numbers, engine types, T/M, loop, immo., and area classifications.

5. ECM IDENTIFICATION METHOD

Illustrates how to identify ECMs based on part numbers, ID codes, and broadcasting codes.

B. HARNESS CONNECTORS AND FUSE, RELAYS

1. HARNESS CONNECTORS AND GROUND LOCATION

Shows schematic diagrams of harness connectors for LHD and RHD vehicles and lists ground locations.

1-1. CONNECTOR DESCRIPTION

Lists and describes various harness connectors (X2, X2A, X3, etc.) and their pin counts.

1-2. GROUND LOCATION

Provides a list of common ground point locations within the vehicle.

2. FUSE AND RELAY LOCATION

Illustrates fuse and relay box layouts and lists fuse usage by number and capacity.

C. ELECTRICAL WIRING DIAGRAMS

C-1 Harness Connector Faces

Shows the physical layout and pin configurations of various harness connectors.

1) IGNITION SWITCH, STARTER MOTOR, ALTERNATOR WIRING

Details the wiring diagram for the ignition switch, starter motor, and alternator.

2) IGNITION WIRING(IEFI-6)

Provides the wiring diagram for the ignition system using the IEFI-6 engine management system.

3) INJECTION NOZZLE, ECM POWER, ECM GROUND WIRING(IEFI-6)

Details the wiring for the fuel injection system, ECM power, and ground connections.

4) COOLANT TEMPERATURE SENSOR(CTS), MANIFOLD AIR PRESSURE(MAP) SENSOR, VEHICLE SPEED SENSOR, THROTTLE POSITION SENSOR(TPS) IAC VALVE, O2 SENSOR WIRING(IEFI-6)

Covers wiring diagrams for various engine sensors and control units.

5) "SERVICE ENGINE SOON" LIGHT, FUEL PUMP, ALDL TESTER WIRING(IEFI-6)

Details wiring for the service engine soon light, fuel pump, and ALDL diagnostic connection.

6) IGNITION WIRING(IEFI-S)

Provides the wiring diagram for the ignition system using the IEFI-S engine management system.

7) INJECTION NOZZLE, ECM POWER, ECM GROUND WIRING(IEFI-S)

Details wiring for the fuel injection system, ECM power, and ground connections for IEFI-S.

8) COOLANT TEMPERATURE SENSOR(CTS), MANIFOLD AIR PRESSURE(MAP) SENSOR, VEHICLE SPEED SENSOR, THROTTLE POSITION SENSOR(TPS) IAC VALVE, O2 SENSOR WIRING(IEFI-S)

Covers wiring diagrams for engine sensors and control units for IEFI-S.

9) "SERVICE ENGINE SOON" LIGHT, TCC, FUEL PUMP, ALDL TESTER WIRING(IEFI-S)

Details wiring for the service engine soon light, TCC, fuel pump, and ALDL for IEFI-S.

10) LIGHT WIRING

Details wiring for headlamps, HLLD system, illumination, and dimmer controls.

11) FRONT FOG LAMP & REAR FOG LAMP

Details wiring for front and rear fog lamps.

12) DAY TIME RUNNING LIGHT, CLEARANCE LAMP, LICENCE PLATE LAMP, HORN WIRING

Details wiring for DRL, clearance lamps, license plate lamps, and horn.

13) GLOVE BOX LAMP, CIGARETTE LIGHTER, DIGITAL CLOCK ROOM LAMP, TRUNK ROOM LAMP, WIRING

Details wiring for glove box lamp, cigarette lighter, room lamp, and trunk lamp.

14) BRAKE LAMP, REVERSE LAMP, TCC WIRING

Details wiring for brake lamps and reverse lamps.

15) TURN SIGNAL LAMP, HAZARD LAMP WIRING

Details wiring for turn signal and hazard lamps.

16) CHIME BELL, AUTO TRUNK, FUEL INLET SWITCH WIRING

Details wiring for chime bell, auto trunk, and fuel inlet systems.

17) REAR WINDOW DEFROSTER WIRING

Details wiring for the rear window defroster system.

18) WIPER WIRING

Details wiring for the wiper and washer systems.

19) CASSETTE RADIO WIRING

Details wiring for speakers and the cassette radio unit.

20) POWER WINDOW WIRING(LHD, RHD)

Details wiring for power window motors and switches.

21) CENTRAL DOOR LOCKING SYSTEM WIRING (LHD, RHD)

Details wiring for central door locking relays, actuators, and switches.

22) I-P WIRING

Details wiring for instrument panel indicators, lamps, and components.

23) ABS(OPTION)

Details wiring for ABS warning lamp, relay, ECU, motors, and wheel speed sensors.

26) AIR-CONDITIONING WIRING, ELECTRIC FAN, BLOWER MOTOR WIRING(IEFI-6 TYPE)

Details wiring for A/C, electric fan, and blower motor systems for IEFI-6.

26-1) AIR-CONDITIONING WIRING, ELECTRIC FAN, BLOWER MOTOR WIRING(IEFI-S TYPE)

Details wiring for A/C, electric fan, and blower motor systems for IEFI-S.

27) HEAD LAMP LEVELING DEVICE(OPTION)

Explains the HLLD actuating motor and switch operations.