11
Installation Preparation
Check if the refrigerator can pass a
doorway or enter a door first.
Dimensions (including Door Handles)
(Width*Depth*Height) 910mm x 895mm x 1772mm
Find a suitable place to install
Sufficient space from the back of the refrigerator to the wall
for free air ventilation.
Avoid direct sunlight.
Once the installation place is ready, follow
the installation instructions.
If the surrounding temperature of refrigerator
is low (below 5), food can be frozen or the
refrigerator can function abnormally.
If the refrigerator can not
pass through a door
during installation, follow
these steps.
This instruction manual refers to several models. The real
features are model dependent.
Caution
Risk of electric shock! Before removing top hinge cover:
hShut off the water supply to the appliance.
hUnplug the appliance or switch off the fuse.
Removing left refrigerator door
Unscrew top hinge cover with a screw driver and
remove the hinge cover.
Unscrew the earth and disconnect the harness wires
and water tube.
Turn top hinge fastener counterclockwise and remove
the top hinge. (After the hinge is removed, the door can
fall down forward. Be careful!)
Note
1
2
3
To Next Page
Loading...
Need help?
General
