WATER SUPPLY KIT
Connecting the water line to the refrigerator.
(Necessary parts are available at local service agents.)
1. Connect water line to the compression fitting.
- If you are using copper tubing (not supplied), slip the
compression nut (not supplied) and ferrule (not supplied)
on copper tubing.
- If you are using plastic tubing (not supplied), insert the
molded ending of the plastic tubing into the compression
fitting.
2. Tighten the compression nut onto the compression
fitting.
3. Turn the water on and check for any leakage.
15
To Previous Page
Loading...
Need help?
General
