Before first Use of Your Espresso maker
• Remove all packing materials and discard responsibly.
• Ensure all parts are present - see Description of Parts above.
• Check that there is no transit damage to the mains cable or product.
• Place the appliance on a solid, level, heat resistant surface clear of all
obstructions as described above.
• Wash all the accessories (14, 15 & 16) in warm soapy then rinse and dry
thoroughly.
• Preheat the Espresso Maker before first use – see Preheating Your Espresso
Maker before First Use below.
• Place the Drip Tray (12) into the coffee maker and place the Drip Tray Plate (11)
on top of the Drip Tray (12). See Fig. 1 & 2 below:
Instructions for Use – Preheating Your Espresso Maker
1. Lift the Water Tank Lid (8) and fill the Water Tank (9) with water up to the MAX
line, install the Coffee Filter (15) into the Coffee Filter Holder (14) by aligning the
notch on the Coffee Filter (15) with the groove on the Coffee Filter Holder (14).
NB Do not put any coffee in the coffee filter at this stage.
2. Rotate the Coffee Filter (15) to the left or right to lock it in place:
To Next Page
Loading...