3
GEARBOX - PNEUMATIC SECTION
Removal and installation CF65/75/85 series
4-2
Installing the gear lever selector valve
1. Connect the air pipes to the selector valve
by pushing them into the respective
connections as far as possible.
For the connection points in the selector
valve, see “Technical data”.
2. Slide the coloured rings back over the
connection points.
3. Check whether the pneumatic system has
an airtight connection and whether the
range-change gear and the splitter can be
operated.
4. Install the selector valve onto the gear lever
and tighten the union nut.
5. Attach the gear lever dust cover to the cab
floor.
V300159
ᓻ 200337
4
https://www.truck-manuals.net/
To Next Page
Loading...
