3
CF65/75/85 series Removal and installation, gearbox
EATON FS/6309A GEARBOX
3-5
3.4 REMOVAL AND INSTALLATION, GEARBOX FRONT COVER SEALING RING
Removing the gearbox front cover oil seal
1. Remove the gearbox.
2. Disconnect the clutch housing and the
clutch release assembly.
3. Remove the attachment bolts from the
gearbox front cover. Remove the gearbox
front cover. Clean the contact surfaces of
the gearbox front cover and the gearbox
housing.
4. Remove the oil seal from the gearbox front
cover.
Installing the gearbox front cover oil seal
1. Fit the oil seal in the gearbox front cover
using special tool (DAF No. 1329354).
2. Apply sealant to the contact surface of the
gearbox front cover. Fit the gearbox front
cover. Tighten the attachment bolts to the
specified torque. See “Technical data”.
3. Fit the clutch housing and clutch release
assembly to the gearbox. Tighten the
attachment bolts to the specified torque.
See “Technical data”.
4. Fit the gearbox.
8
ᓻ 0111
https://www.truck-manuals.net/
To Next Page
Loading...
