DAF CF75 Series - Page 335

3
CF65/75/85 series Removal and installation
CLUTCH
5-7
5.5 REMOVAL AND INSTALLATION, PULL-TYPE CLUTCH LEVER
Removing the pull-type clutch lever
1. Remove the gearbox.
2. Remove the thrust bearing.
3. Remove the attachment bolts from the
clutch lever.
Installing the pull-type clutch lever
1. Apply a little grease to the moving parts of
the clutch lever.
2. Install the clutch lever on the gearbox and
tighten the attachment bolts.
3. Fit the thrust bearing.
4. Fit the gearbox.
V300441
10
ᓻ 200337
https://www.truck-manuals.net/