3
CF65/75/85 series Removal and installation
AS TRONIC GEARBOX
4-5
Installing the gearbox modulator
Seal the freed opening of the
gearbox with a clean cloth, so that
no objects can fall into the gearbox
while the selector shafts are being
adjusted.
1. Fit the special tool (2) (DAF No. 1453138)
and secure it using the bolts (4).
CAUTION!
Always put the central selector
shaft (7) at a slant before moving it.
This means that the round bolt (9)
points either to the left or to the
right.
2. Put the central selector shaft (7) in the
neutral position using the special tool. Align
the outer two selector shafts (6 and 8) with
the central selector shaft (7) using the
special tool.
Note:
The lever (1) must be moved twice before
the selector shafts are adjusted. To do so,
removethepin(3)sothatthelevercanbe
fitted in the new position.
V300830
1 44 6 32
V300831
3
6
44 8 7 1 2
14
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
