3
CF65/75/85 series Removal and installation
AS TRONIC GEARBOX
4-7
5. Check that the control rods (4) are properly
adjusted, using the tool (1) if necessary.
V300696
4
213
6. Put the recess of the pad (6) on the
selection cylinder exactly in the centre of
the control rod (4).
Note:
Ensure that the rubber seals (1 and 2) are
fitted on the modulator and are not
damaged.
V300692
4
5
6
23
1
14
ᓻ 200337
https://www.truck-manuals.net/
To Next Page
Loading...
