DAF CF75 Series - Page 95

3
CF65/75/85 series Removal and installation
MECHANICAL GEARBOX CONTROL
3-3
3.2 REMOVAL AND INSTALLATION, GEAR LEVER GAITER
Removing the gear lever gaiter
1. Make sure there are no loose items in the
cab. Tilt the cab.
2. After marking them, remove the air pipes
that run from the switch to the various
valves.
3. Slide the gaiter over the threaded bush and
then loosen it from the connection piece
between the gear lever and the selector
valve.
4. Remove the gear lever control rod and
secure it so that no damage can be caused
to the air pipes.
5. Remove the switch with the selector valve
and air pipes from the gear lever.
V300276
V300277
2
ᓻ 0111
https://www.truck-manuals.net/