3
CF65/75/85 series Removal and installation
MECHANICAL GEARBOX CONTROL
3-7
5. Remove the locking plate with the dust
cover and spring from the bearing cover.
6. Remove the dust cover from the locking
plate.
Installation, gear lever unit inner dust cover
1. Fit the inner dust cover .
Note:
When fitting the inner dust cover, ensure
that it is fitted properly to the locking plate
as can be seen in position A. Fitting as in
position B will lead to irritating engine noise
in the cab.
V300278
V300406
B
A
2
ᓻ 0111
https://www.truck-manuals.net/
To Next Page
Loading...
