Need help?Do you have a question about the Daheng Imaging MERCURY2 GigE Series and is the answer not in the manual?
Recommendations for preventing electromagnetic interference and electrostatic discharge to protect the cameras.
Specifies operating and storage temperature, humidity, and PC requirements for optimal camera performance.
Guidelines for safe mechanical installation, including screw specifications and tripod adapter instructions.
Steps for preparing the host computer, including software package installation and interface options.
Outlines the process for installing the camera driver and the GalaxySDK.
Explains how to configure the camera's IP address using the provided tool.
Steps for opening the camera device and starting image acquisition using GalaxyView software.
Lists the detailed technical parameters for the MER2-041-302GM/C camera.
Lists the detailed technical parameters for the MER2-041-302GM/C-P camera.
Lists the detailed technical parameters for the MER2-160-75GM/C camera.
Lists the detailed technical parameters for the MER2-202-60GM/C camera.
Lists the detailed technical parameters for the MER2-231-41GM/C camera.
Describes the camera's I/O port implementation using an 8-pin Hirose connector.
Explains the hardware schematics and voltage/current requirements for the opto-isolated input circuit.
Details the hardware schematics and output characteristics of the opto-isolated output circuit.
Describes the circuit for bidirectional GPIO pins, supporting both input and output configurations.
Covers the control of input/output signals, including mode operations and debouncing.
Details the start, stop, and modes of image acquisition, including trigger types.
Explains fundamental camera features like Gain, Pixel Format, ROI, and Auto functions.
Describes image processing functions such as color correction, saturation, gamma, and sharpness.
Covers aspects of image data transmission, including frame rate, packet size, and bandwidth.
Introduces the GigE IP Configurator tool for managing camera network settings.
Details the plugin for calculating, previewing, and applying Flat Field Correction coefficients.
Introduces the plugin for analyzing and correcting defective pixels and noise.
General| Sensor Type | CMOS |
|---|---|
| Interface | GigE |
| Lens Mount | C-Mount |
| Shutter Type | Global Shutter |
| Dynamic Range | Up to 70 dB |
| Operating Temperature | 0°C to 50°C |
| Power Supply | PoE (Power over Ethernet) |
| Bit Depth | 8/10/12 bit |
| Dimensions | 29 mm x 29 mm x 29 mm (excluding lens mount) |
| Weight | Varies by model |
| Frame Rate | Varies by model, up to 120fps |
To Next Page
