SAFETY INSTRUCTIONS
•
Read the operating instructions carefully before operating your shredder!
• Do not use in the vicinity of flammable liquids or gases.
•
Do not use in the vicinity of corrosive materials.
•
Do not expose to water or wet conditions.
•
Do not let children operate this, or any other, office equipment.
• Do not reach into the cutting mechanism during operation –
not even from the top or with objects.
•
Do not operate the shredder for a period of more than 5 minutes in no-
load operation (operation without paper).
• Keep hair clear of machine.
•
Keep neckties clear of machine.
•
Keep bracelets, or any other jewelry, clear of machine.
•
Power connection must be accessible at all times.
•
Disconnect from power supply before servicing.
• The safety devices must not be disabled or removed.
BEFORE YOU SHRED
Remove Transport Bolts (6) with wrench provided.
•
Read all instructions carefully.
•
Record the Serial Number in the space provided inside the front cover.
•
Be sure the electrical outlet provides the proper power for your shredder (see
rating label on rear of shredder).
ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME
To Next Page
Loading...
Need help?
General
