Need help?Do you have a question about the Dahle 41422 and is the answer not in the manual?
General| Sheet Capacity | 22 sheets |
|---|---|
| Noise Level | 52 dB |
| Run Time | Continuous |
| Shreds | Paper, Staples, Paper Clips, Credit Cards, CDs/DVDs |
| Warranty | 2 years |
Details the intended purpose of the shredder and warranty exclusions like improper use or unauthorized modifications.
Instructions for removing the transport lock before initial operation and refitting it when moving the appliance.
Identifies key components of the document shredder, including control unit, paper feed, and collection bin.
Details the main switch, thermal cut-out, mains connector, mains cable, and the fine dust filter.
Explains the functions of the control panel buttons and indicators like On/Off, Forward, Reverse, and status lights.
Details how to check the voltage and mains frequency against the rating plate for compatibility.
Lists model numbers, sheet capacity (70/80 g/m²), and cutting strip/particle dimensions.
Details the security levels (e.g., S2, S3, S4) associated with different document shredder models.
Provides specifications for noise levels (dB/A) and electrical requirements (voltage, frequency, wattage).
Lists the physical dimensions (H x W x D) and collection bin capacity (liters) for each model.
Details cutting dimensions and security levels for specific model numbers not covered previously.
Provides detailed specifications including noise levels, power, dimensions, and capacity for higher-end models.
Steps for preparing the document shredder for operation, including bin placement and power connection.
Instructions for feeding paper, automatic operation, stand-by mode, and continuous operation.
Procedure for preparing the shredder, including correct bin placement for media shredding.
How to insert CDs, DVDs, or bank cards and the automatic shut-off mechanism.
Detailed instructions on how to change the DAHLE fine dust filter, including screw removal and filter replacement.
Information on the disposal of the DAHLE fine dust filter and liability for improper use.
Explains the paper capacity display feature of Safe Technology and its function in preventing overload.
Describes the automatic acoustic shut-down feature, activated by voice control or tapping the appliance.
Details the automatic oiling system for cross-cut shredding, including how to fill the oil tank.
Important note regarding oil tank filling, mentioning voltage and the need for DAHLE oil.
Explains the signal for a full collection bin, including warnings and how to empty the bin.
Covers reasons for automatic motor shut down, such as overheating, paper jam, or microphone trigger.
Describes the signal indicating the door is open and the required action to close it.
Instructions on adjusting the microphone sensitivity settings (increase/decrease) via the control panel.
Guide to changing factory settings for different paper types or sheet performance, including specific button sequences.
Steps to restore the document shredder to its original factory settings using button combinations.
Addresses automatic shutdown due to extended operation or overheating, requiring a cool-down period.
Troubleshooting steps when the shredding process does not start, checking power, switches, and thermal cut-out.
Guidance on how to handle paper jams, including automatic reverse, manual intervention, and avoiding damage.
Specific instructions for paper jams on certain models, including reverse duration and switch inhibition.
Explanation of the energy-saving mode, including activation time and how to resume operation.
General guidance on maintenance and care, emphasizing the use of DAHLE spare parts and cleaning procedures.
To Next Page
