Need help?Do you have a question about the Dahle PaperSAFE PS 100 and is the answer not in the manual?
General| Brand | Dahle |
|---|---|
| Model | PaperSAFE PS 100 |
| Category | Paper Shredder |
| Language | English |
Crucial to read and follow all operating and safety instructions before putting the document shredder into operation.
Shredder is designed for paper; may shred CDs/DVDs, cards depending on model; warranty excludes improper use damage.
Key safety rules including avoiding heat, upright operation, no device opening, and correct environmental conditions.
Not intended for unsupervised use by individuals with limited physical, sensory, or mental capabilities.
Dispose of the shredder and packaging responsibly at authorized collection points, not in domestic waste.
Caution symbol indicating risk of electric shock. Do not open the device.
Warning symbol for moving parts. Keep body parts away from feed opening.
Attention symbol for sharp edges. Do not touch these areas.
Do not touch paper feed with hands, clothing, or hair.
Remove paper clips and staples before inserting documents into the shredder.
Disconnect the shredder from power supply before performing any maintenance work.
Symbols indicating automatic shut-down for cooling or when the housing is open.
Overview of the control panel including Power, Overheat, Overload indicators and FWD/Auto/Off/Rev settings.
Connect the document shredder to the appropriate power supply (110-120V or 220-240V).
Illustrates correct paper feeding into the shredder for optimal performance.
Explains how the shredder handles overload and overheat conditions, including automatic shutdown.
Instructions for shredding credit cards, indicating the maximum number allowed per pass.
Steps to safely remove and empty the shredded waste bin.
Instructions for cleaning the shredder, including disconnecting power and using appropriate methods.
To Next Page
