Need help?Do you have a question about the Dahua Technology DH-XVR5104C-4KL-I3 and is the answer not in the manual?
General| Video Input | 4 channels |
|---|---|
| Video Output | 1 HDMI, 1 VGA |
| Operating Humidity | 10% to 90% |
| Max. IP Camera Input | 4 channels |
| Max. Recording Resolution | 8MP (3840x2160) |
| Max. Decoding Capability | 4x 1080p@30fps |
| AI Coding | Supported |
| Smart Motion Detection | Supported |
| Audio In/Out | 1/1 |
| Hard Drive Support | 1 SATA |
| Network Interface | 1 RJ-45 |
| USB | 2 USB 2.0 |
| Compression | H.265+/H.265/H.264+/H.264 |
| Alarm Input | 4 channels |
| Alarm Output | 1 channel |
| Power Supply | 12V/2A |
| Operating Temperature | -10°C to +55°C |
Information on signal words used in the manual for hazard indication.
Guidelines for proper installation and operation of the device.
Precautions related to electrical safety, battery, and power supply usage.
Details on AI features like face detection, recognition, and IVS.
Checklist for verifying device appearance, package, and components.
Instructions for installing a Hard Disk Drive (HDD) into the device.
Features for real-time recording, various playback modes, and time title overlay.
Instructions for connecting video and audio sources to the device.
Guidance on connecting alarm input and output devices to the system.
Steps for initial setup, including booting and password configuration.
Features and controls for viewing live video feeds from connected cameras.
Configuration and operation of PTZ (Pan-Tilt-Zoom) cameras.
Adjusting image parameters like saturation, brightness, and sharpness for connected cameras.
Adding and managing remote devices like IP cameras via IP address.
Settings for manual or automatic video recording to main and sub streams.
To Next Page