Need help?Do you have a question about the Dahua Technology DH-XVR5108C-X and is the answer not in the manual?
General| Operating System | Embedded LINUX |
|---|---|
| Analog Camera Input | 8 channels |
| Audio In/Out | 1/1, RCA |
| Two-way Talk | Yes |
| Recording Resolution | 1080p/720p/960H/D1 |
| Record Mode | Manual, Schedule (Regular, Continuous), MD (Video detection: Motion Detection, Video Loss, Tampering), Alarm, Stop |
| Video Output | 1 HDMI, 1 VGA |
| Multi-screen Display | 1/4/8/9 |
| OSD | Yes |
| Ethernet | 1x RJ-45 (10/100Mbps) |
| Smart Phone | iOS, Android |
| Interoperability | ONVIF compliant |
| Internal HDD | 1x SATA (up to 6TB) |
| USB Interface | 2x USB 2.0 |
| Power Supply | DC12V |
| Operating Conditions | -10°C to +55°C (14°F to 131°F) |
| Compression | H.264 |
| Network Interface | RJ-45 Ethernet port |
Important safety information for using the device. Covers general and specific safety precautions.
Step-by-step guide for installing a Hard Disk Drive in the device.
Steps for initial device setup, including booting and password configuration.
Explains how to view live video streams and navigate the interface.
Adjusting image parameters like brightness, contrast, and sharpness.
Settings for main and sub video streams, including compression and resolution.
How to enable manual and automatic video recording functions.
Setting up triggers for taking snapshots, such as scheduled or event-based.
Enabling record control functions for accessing playback.
Configuring how the device receives and processes alarm inputs.
Configuration and usage of Smart Motion Detection (SMD).
Setting up and searching for detected human faces.
Configuration of Intelligent Video System (IVS) features like tripwire.
To Next Page