User's Manual
160
Snapshot
Select the
check box to take a snapshot of the selected
channel.
To use this function, make sure the following settings are configured:
The snapshot function is enabled for motion detect alarms in
Main
Menu > STORAGE > SCHEDULE > Snapshot
.
Select
Main Menu > CAMERA > ENCODE > Snapshot
, in the
list, select
.
Buzzer Select the check box to activate a buzzer noise at the Device.
Log Select the check box to enable the Device to record a local alarm log.
Voice Prompts
Select to enable audio broadcast/voice prompts in response to a
human face detection event.
Click Apply to complete the settings.
5.10.3.2 Searching for Detected Faces
Select Main Menu > FACE DETECT > SMART SEARCH.
Smart search
In the Begin Time box and End Time box, enter the time.
Click Search.
The faces searched in the defined period display.
To Next Page
Loading...
Need help?
General
