User's Manual
220
Browse
2) Select the route.
If there are several USB storage devices are connected to the Device, you can select
from the Device Name list.
Click Refresh to total space, free space and the file list in the selected USB storage
device.
In the case of insufficient capacity, click to delete the needless files.
Click New Folder to create a new folder in the USB storage device.
3) Click
Apply to save the route selection settings.
The
Test interface is displayed again.
Click to start packet capturing and backing up.
Only the data packet of one LAN can be captured at one time.
After capturing starts, you can exit the Test interface to perform other operations such
as web login and monitoring.
Click to stop capturing.
The backup data is saved in the selected route under the naming style "LAN name-time.pcap."
You can open it by using Wireshark software.