22
Figure 3-14
Enter “Start Time” and “End Time”, and press . The screen prompts “Do you want 步骤3
to save settings?”
Press [Yes] to complete holiday configuration. 步骤4
3.6.1.3 Holiday Period
Bond holiday with period. Enable access control according to the selected period during holiday;
it is invalid in other time.
Select “Access > Period Management> Holiday Period”, and the screen displays Figure 步骤1
3-15.
Figure 3-15
Enter the period number set in “Period Config” and press . 步骤2
The screen prompts “Bonded successfully”, so holiday and period are bonded.
To Next Page
Loading...
