23
3.6.1.4 NO Period
After setting NO period, the door keeps open within the period.
Select “Access > Period Management> NO Period”, and the screen displays Figure 步骤1
3-16.
Figure 3-16
Enter the period number set in “Period Config” and press . 步骤2
The screen prompts “Bonded successfully”, so as to complete NO period config.
3.6.1.5 NC Period
After setting NC period, the door keeps closed within the period.
Select “Access > Period Management> NC Period”, and the screen displays Figure 步骤1
3-17.
Figure 3-17
Enter the period number set in “Period Config” and press . 步骤2
The screen prompts “Bonded successfully”, so as to complete NC period config.
To Next Page
Loading...
