24
3.6.1.6 Remote Verification Period
During this period, the door can be opened only after the platform issues a remote unlock order.
Select “Access > Period Management> Remote Verification Period”. 步骤1
Enter the period and press . 步骤2
3.6.2 Unlock Mode
Unlock mode includes any combination unlock, unlock config by period and group combination
config.
3.6.2.1 Unlock Mode
Unlock with any one or multiple combination of card, fingerprint, face and password.
Select “Access > Unlock Mode > Unlock Mode”. 步骤1
Press up and down button to select the combination mode. 步骤2
/ represents “or”. For example, card/fingerprint means that the door can be
unlocked with card or fingerprint.
+ represents “and”. For example, card + fingerprint means that the door can be
unlocked by swiping card first and then pressing the fingerprint.
Press . The screen prompts “Do you want to save settings?” 步骤3
Press [Yes]. The system returns to “Unlock Mode” interface. 步骤4
Press the switch after “Unlock Mode” to enable. 步骤5
: enable.
: disable.
3.6.2.2 Unlock by Period
Set different unlock modes for different periods. For example, period 1 selects unlocking by
card, whereas period 2 selects unlocking by fingerprint.
Select “Access > Unlock Mode > Unlock by Period”. 步骤1
The screen displays Figure 3-18.
To Next Page
Loading...
